Troubleshoot email, wireless, intermittent connection and slow speeds Setup and Troubleshoot e-mail software Security Downloads, Information, and Terms Setup and Troubleshoot Modems Setup and Troubleshoot Wireless on your Computer or Modem step-by-step tutorials on wired troubleshooting, wireless troubleshooting and email

Static IP Block on an Actiontec M1000



1. Open a web browser and go to http://192.168.0.1.



2. Select "Quick Setup"



3. Select "Advanced IP Configuration"



4. Select "PPPoE"



5. Enter your "PPP Username", "PPP Password" and "Confirm PPP Password".



6. Do the following:
  • Select "Block of Static IP Addresses"
  • Enter your "Gateway Address" and "Subnet Mask"
  • LAN DHCP Addressing: Public Static Subnet (VIP mode off)*
*If you select Public Static Subnet this will cause the modem to assign all devices on the network a WAN IP address. If you need the modem to hand out LAN IP Addresses, see Private LAN Subnet (VIP mode).



7. Do the following:
  • Select "Static DNS"
  • Primary DNS: 205.171.3.65
  • Secondary DNS: 205.171.2.65


8. Select "Apply"