Troubleshoot email, wireless, intermittent connection and slow speeds Setup and Troubleshoot e-mail software Security Downloads, Information, and Terms Setup and Troubleshoot Modems Setup and Troubleshoot Wireless on your Computer or Modem step-by-step tutorials on wired troubleshooting, wireless troubleshooting and email

Static IP Block on an Actiontec Q1000

1. Open a web browser and go to

2. Select "Quick Setup"

3. Select "Advanced IP Configuration"

4. Select "PPPoE"

5. Enter your "PPP Username", "PPP Password" and "Confirm PPP Password".

6. Do the following:
  • Select "Block of Static IP Addresses"
  • Enter your "Gateway Address" and "Subnet Mask"
  • LAN DHCP Addressing: Public Static Subnet (VIP mode off)*
*If you select Public Static Subnet this will cause the modem to assign all devices on the network a WAN IP address. If you need the modem to hand out LAN IP Addresses, see Private LAN Subnet (VIP mode).

7. Do the following:
  • Select "Static DNS"
  • Primary DNS:
  • Secondary DNS:

8. Select "Apply"