CenturyLink® Modem Configuration

CenturyLink.com help

Connection Status

WAN SettingsWAN Settings set the protocol and addressing type required by your ISP for Internet access.

1. Select the ISP protocol.

Protocol Selected: PPPoE

2. Enter the PPP username and password.

Hide Password  

3. Select the IP addressing type.

4. Set the DNS type.

5. Set the IPv6 addressing values.

Disable

6. Set the WAN IPv6 DNS server.

7. Set the DNS IP version resolver preference below.

8. Click "Apply" to save your changes.

Apply

6. Click "Apply" to save your changes.

Apply

2. Select the VPI/VCI Setting.

3. Click "Apply" to save your changes.

Apply

2. Select the Transport Mode Settings.

3. Click "Apply" to save your changes.

Apply

2. Set the IP information.

3. Select the IP type.

3. Select the DNS type.

4. Click "Apply" to save your changes.

Apply

2. Set the IP information.

3. Select the IP type.

4. Select the DNS type.

5. Click "Apply" to save your changes.

Apply

2. Enter the ISP host name and domain name (optional).

3. Select the IP addressing type.

Static IP: This option is used when the WAN IP must be configured manually on the RG. Consult your documentation to see if this applies to your service before entering the WAN IP information in Step 4.

Enter the Static IP Information.

Enter the Static Block IP Information.

Select the DNS type.

Select the WAN IPv6 connection protocol.

Set the IPv6 addressing values.

Set the WAN IPv6 DNS server.

Set the DNS IP version resolver preference below.

Click "Apply" to save your changes.

Apply